Refrigeration Condensing Units,Freezer Air Cooled Condenser,Air Cooler Evaporator

Small influent water treatment plan for refrigeration system Nov 20, 2021
If the water in the cold room condensing unit is not serious, then there is no need to disassemble the air cooled evaporators and air cooled condensers, just change the filter. 1. Replace the filter: first replace the high-pressure dryer filter of the unit system. If it is a dry filter barrel, you can use clean and dry degreasing gauze to make pockets and then modify the active "alumina particles"...
- Air cooled evaporators
- Cold room condensing unit
- Air cooled condensers
Treatment method for large amount of water in the refrigeration system Nov 20, 2021
1. Disassemblethe cold room condensing unit components:air cooled condensers, air cooled evaporators, compressor (remove the oil filter), high-pressure dryer filter, expansion valve, solenoid valve, shut-off valve, liquid storage tank, connecting pipes, etc. can be disassembled (large The parts do not have to be shifted) to facilitate the next step. 2. Blowing fouling in sections: Blow out all the...
- Air cooled evaporators
- air cooled condensers
- Cold room condensing unit
cold storage air conditioners installation specifications Nov 12, 2021
1. Installation content First, open the lifting screw holes, and open the copper pipe and wire holes. The last two holes should be trimmed to prevent hidden dangers from the quick opening. The back of the cold storage air conditioners and the vertical plate of the self-distributed drain pipe are positioned at 300mm, evaporating The drainage hole of the device is perpendicular to the pre-installed ...
Daily precautions for cold room cooling unit Oct 19, 2021
For the evaporator of a cold room cooling unit, it is necessary to check the defrosting situation frequently, and whether the defrosting is effective in time will affect the refrigeration effect and cause liquid back in the refrigeration system. Frequently observe the compressor's operating status and check its exhaust temperature. During seasonal operation, pay special attention to the system's o...
- cold room cooling unit
- cool room condensing unit
- cooler unit
Summary of installation and commissioning experience of refrigeration unit Oct 15, 2021
1. Installation of air cooler for cold room 1). When selecting the position of the lifting point, first consider the best position for air circulation, and secondly, consider the structural direction of the library body. The clearance between the air cooler and the library board should be greater than the thickness of the air cooler for cold room. 2). All hanging bolts of the air cooler for cold r...
- refrigeration unit
- air cooler for cold room
- unit cooler
Refrigeration system professional vocabulary and explanation Oct 06, 2021
ONE，Refrigeration system professional vocabulary 1. Heat Heat is a form of energy. If the object is heated, the heat is sucked in; if it is cooled, the heat is discharged. The international unit is Joule (J). Commonly used units: kJ (kilojoule), BTU (British thermal unit), kCal (kcal) 2. Cooling capacity A unit of time, the heat taken away from the air-conditioned place by the air-conditioning uni...
- Refrigeration system
- condensers
- evaporator
Cold storage condensing unit installation and commissioning Sep 27, 2021
1. Installation of the cold room evaporators 1). When choosing the position of the lifting point, first consider the best position for air circulation, and secondly, consider the structural direction of the library body. The clearance between the air cooler and the library board should be greater than the thickness of the cold room evaporators. 2. Group installation of cold room condensing u...
- cold room evaporators
- cold room condensers
- cold room condensing unit
Combined cold storage cooling method Sep 17, 2021
1. There should be no influence of various man-made heat flows around the library. The library body should be closed, the lighting in the library should be extinguished, and the electric heater should be used for preheating. The test can be performed only after the temperature in the warehouse reaches 32°C and stabilizes for 1 hour. 2. The temperature in the cold storage should be maintained at 32...
- cold storage
- Air cooled evaporators
- condensing unit
The relationship and adjustment of the four major components of the refrigeration system and the refrigeration capacity Sep 08, 2021
Because the refrigeration capacity of each cold storage refrigeration equipment will change under different working conditions, some increase, some decrease, so a certain margin is reserved in advance in the design to prevent it under certain operating conditions During operation, the cooling capacity of the entire device cannot be brought into full play due to the excessive reduction in the cooli...
- Air cooled evaporators
- Heat exchanger condensers
- KIDOO refrigeration

1 2 3 4 5 6

A total of 6 pages

Categories

Blog

New Blog

Tags